Reasearch Awards nomination

Email updates

Keep up to date with the latest news and content from Journal of Clinical Bioinformatics and BioMed Central.

Open Access Research

Availability of MudPIT data for classification of biological samples

Dario Di Silvestre1, Italo Zoppis2, Francesca Brambilla1, Valeria Bellettato1, Giancarlo Mauri2 and Pierluigi Mauri1*

Author Affiliations

1 , Institute for Biomedical Technologies (ITB-CNR), via F.lli Cervi 93, Segrate (Milan), Italy

2 Department of Informatics, Systems and Communication, Viale Sarca 336, University of Milano-Bicocca, Milan, Italy

For all author emails, please log on.

Journal of Clinical Bioinformatics 2013, 3:1  doi:10.1186/2043-9113-3-1


The electronic version of this article is the complete one and can be found online at: http://www.jclinbioinformatics.com/content/3/1/1


Received:2 October 2012
Accepted:7 January 2013
Published:14 January 2013

© 2013 Di Silvestre et al.; licensee BioMed Central Ltd.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License ( http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Background

Mass spectrometry is an important analytical tool for clinical proteomics. Primarily employed for biomarker discovery, it is increasingly used for developing methods which may help to provide unambiguous diagnosis of biological samples. In this context, we investigated the classification of phenotypes by applying support vector machine (SVM) on experimental data obtained by MudPIT approach. In particular, we compared the performance capabilities of SVM by using two independent collection of complex samples and different data-types, such as mass spectra (m/z), peptides and proteins.

Results

Globally, protein and peptide data allowed a better discriminant informative content than experimental mass spectra (overall accuracy higher than 87% in both collection 1 and 2). These results indicate that sequencing of peptides and proteins reduces the experimental noise affecting the raw mass spectra, and allows the extraction of more informative features available for the effective classification of samples. In addition, proteins and peptides features selected by SVM matched for 80% with the differentially expressed proteins identified by the MAProMa software.

Conclusions

These findings confirm the availability of the most label-free quantitative methods based on processing of spectral count and SEQUEST-based SCORE values. On the other hand, it stresses the usefulness of MudPIT data for a correct grouping of sample phenotypes, by applying both supervised and unsupervised learning algorithms. This capacity permit the evaluation of actual samples and it is a good starting point to translate proteomic methodology to clinical application.

Keywords:
Sample classification; MudPIT; SVM; Clinical proteomics; Label-free quantification

Background

The identification of proteins changing their quantitative level is a key aspect to investigate biological systems as well as to develop strategies for classifying samples into pre-specified categories, such as healthy and diseased. In fact, one of the main objectives of the clinical proteomics is to use relevant biomarkers for improving disease diagnosis or for monitoring the efficacy of treatments [1].

A procedure for discriminating biological samples involves a preliminary evaluation of experimental data, useful for building classification models [2]. In this context, a wide variety of algorithms has been used for processing raw mass spectra, mainly generated by MALDI [3-10] and SELDI technologies [11-14]. Although results from diagnostic studies based on SELDI have generated both excitement and scepticism, it doesn’t allows a direct identification of proteins and it is based on m/z signals, only. On the other hand, MALDI is mainly used for the identification of peptides and its reproducibility is strongly dependent by sample preparation method. Besides, in many studies, selected discriminant mass spectrometry signals have then been identified by liquid chromatography (LC) coupled to mass spectrometry (MS). Nevertheless, few works have directly taken into consideration LC-MS data for discriminating biological samples [15,16]. On the contrary, some authors have used them, combined to machine learning algorithms, for improving tandem mass (MS/MS) spectra quality assessment and hence, the protein identification [17-20].

Recently, the improvement of robustness and reproducibility of the MudPIT (Multidimensional Protein Identification Technology) approach, based on two dimensional liquid chromatography coupled to tandem mass spectrometry, has permitted a correct grouping of phenotypes, by using unsupervised algorithms [21-23]. Based on these findings, MudPIT may represent an attractive methodology for improving methods concerning sample classification. It allows to automatically obtain thousands of features comprising spectra, peptide sequences and related proteins [24,25]. In addition, label-free quantification approaches based on spectral count (SpC) or SEQUEST-based SCORE evaluation permit an high-throughput discovering of multiple biomarkers [26-28], which could contain a higher level of discriminatory information.

The present study investigates in-depth the availability of MudPIT data for the classification of biological samples. We focused on classification performances achievable by processing different data-types, such as spectra, peptides and proteins. Specifically, we applied a class of machine learning algorithms, i.e. Support Vector Machine (SVM), to identify most predictive features and to score the data-types according to the inference performances of the algorithm [29,30]. Finally, since the identification of features allowing a model of classification is a key challenge for high-dimensional data, we evaluated how the applied selection method correlates with an independent label-free quantification approach. Therefore, we measured the overlapping of the features selected by SVM with the differentially expressed proteins selected by means of the MAProMa software [31].

Methods

Data collections

For the study purpose, two pre-existing different collections of experimental data were used. They were previously obtained by means of MudPIT analysis of complex samples, such as the adipose and cardiac tissues, collected according to the acquisition of the informed consent of patients, and the ethical approval of protocols for the care and use of laboratory animals, as reported by Brambilla et al.[32] and Simioniuc et al.[23], respectively. Specifically, for collection 1 were considered 30 diseased and 11 healthy controls, while 18 diseased and 18 healthy controls were considered for collection 2 (Additional file 1: Figure S1). Experimental details of the MudPIT analysis are reported in Additional file 2.

Additional file 1. Supplementary Figure S1 (PNG file format) — Sample collections and related experimental data selected and used for the study purpose. For each sample five different datasets were used. In addition to the global protein and peptide profiles, m/z precursor ions, specifically detected from the chromatographic steps corresponding to 60, 120 and 400 mM of ammonium chloride concentration, were considered. They cover the central part of the salt gradient elution range (0-700mM) and assure the identification of most of the peptides.

Format: PNG Size: 139KB Download fileOpen Data

Additional file 2. Supplementary Information (PDF file format).

Format: PDF Size: 31KB Download file

This file can be viewed with: Adobe Acrobat ReaderOpen Data

Data handling of MS results

Raw mass spectra (MS) produced by MudPIT were handled using MZmine software [33]. Peak detection was performed by the chromatogram builder module by using the Centroid algorithm. Each file containing MS spectra was processed individually and converted to pairs of m/z and intensity values by considering all data points above the specified noise level (e3). Then, m/z data points were connected to form chromatograms. In particular, the minimum time span was set to 1 min, the minimum absolute height to e3and the m/z tolerance to 0.5. Finally, peak lists were aligned by Join aligner method applying a ranges of tolerance of 0.5 and 1 min for mass and retention time, respectively.

The experimental tandem mass spectra (MS/MS) were correlated to in-silico tryptic peptide sequences, and accordingly to parent proteins, by using a database search method based on the SEQUEST algorithm [34]. The validity of spectrum/peptide matching was assessed using SEQUEST defined parameter thresholds (Additional file 2). Finally, protein and peptide lists obtained from each sample were handled and aligned using MAProMa software and an in-house R-script, respectively [31,35].

In order to evaluate the reproducibility of the MudPIT approach, protein lists of technical replicates were aligned and then processed using a linear-regression-based analysis:

<a onClick="popup('http://www.jclinbioinformatics.com/content/3/1/1/mathml/M1','MathML',630,470);return false;" target="_blank" href="http://www.jclinbioinformatics.com/content/3/1/1/mathml/M1">View MathML</a>

(1)

where: i = 1,..,n; with n = number of variables (proteins) Yi is the spectral count (SpC) value of the protein i in the first replicate analysis Xi is the spectral count (SpC)) value of the protein i in the second replicate analysis β0 is the intercept of the regression line of the population β1 is the slope or gradient of the regression line of the population ui is the error term

Proteomic datasets

Each sample belonging to the collection 1 and 2 was represented by five different datasets, including the global protein/peptide profiles and m/z precursor ions from three different chromatographic steps (60, 120, 400 mM) of the applied analytical method (Additional file 2). Each dataset was formatted in a s×f matrix, where s represents the number of samples and f the number of features. Entries of the protein data matrix were the spectral count (SpC) values assigned by the SEQUEST algorithm to each identified protein; in the same way, Xcorrelation values and peak area intensity (AUC) were used for the peptide and mass spectra data matrices, respectively (Additional file 3: Table S1).

Additional file 3. Supplementary Table S1 (PNG file format) — Matrix of high-dimensional proteomic data obtained analyzing sample by means of the MudPIT approach. Rows represent features (e.g., m/z values, peptides or proteins), while columns indicate samples. In each cell it is reported a value corresponding to the parameter associated with feature. In particular, peak area intensity (AUC) was used for m/z mass points, Xcorrelation (Xcorr) values for peptides and spectral count (SpC) values for proteins.

Format: PNG Size: 27KB Download fileOpen Data

Label-free quantification approach

Proteins differentially expressed between the considered phenotype groups were identified by using a label-free quantification approach. In particular, SEQUEST-based SCORE values were processed by means of the DAve and DCI formulas, which are inserted in MAProMa software [31]. In addition, SpC values were evaluated by using the G-test [36] and the unpaired Student’s t-test. In this scenario, proteins with DAve ≥ 0.3 (≤ −0.3) and DCI ≥ 300 (≤ −300), or statistical meaningful at least for one test (P > 95 %) were considered for the study purpose (Additional file 2 and Additional file 4: Figure S2).

Additional file 4. Supplementary Figure S2 (PNG file format) — Venn diagram. Venn diagram of differentially expressed proteins identified in collection 1 (A) and collection 2 (B). Evaluation of quantitative level was performed by applying DAve and DCI formulas, G-test and Student’s t-test. In brackets is reported the number of proteins matching with the features selected by SVM.

Format: PNG Size: 166KB Download fileOpen Data

Evaluation procedures by SVM

In order to investigate on the classification performance achievable by the different data-types (spectra, peptides and proteins) we designed specific Rapid Miner workflows (RM-WF) mainly addressed to implement a class of algorithms widely used in the machine learning community, i.e., the Support Vector Machine (SVM) [30].

In our investigation we sequentially applied two main operational processes i.e., feature selection and model construction (and validation), respectively. We briefly summarize in the following issues the RM-WF designed for each phase (a complete description of each operator is reported in Additional file 5: Figure S3).

1. Feature selection phase. Due to the high number of signals, features selection may be helpful to improve both the inference quality and the data understanding. For this reason we first applied a standard feature selection procedure [29]. Broadly speaking we weighted each signal by an information theory criterion (i.e., info–gain ratio[37]). Then we considered to employ in the forward phase only signals having a weight greater than 0.6; this way, only 10 signals were considered. The RM-WF in this case is simple, providing only the info–gain weighting capability as reported in Additional file 5: Figure S3 (a).

2. Model construction and validation phase. To evaluate the classification performance achievable by the different data-types, we employed SVM algorithms as “black boxes” to score each input data-type, according to the inference performances of the algorithm [29]. In order to avoid over-fitting we first sub-sampled a set of different data instances: i.e., for each data set, this phase was applied on (data) instances never used in the above feature selection step. Then, for each instance, we considered only intensity (and counting) values corresponding to the previously suggested 10 signals (i.e., feature selection). This approach has been applied together with an optimization procedure to learn the algorithm parameters. As a matter of fact, different learning model may have many parameters, and often it is not clear which values are best for the learning task at hand; in our case, SVMs involve different kernel types and, in turn, each of such functions uses specific values which we need to define in the learning algorithms [30]. In order for the SVMs to perform as better (and homogeneous) as possible for each data-type, we optimized such parameters over the same space of common values. That is, we searched the best parameter values (i.e., providing the highest SVM inference performances) among all the combinations of common ranges for each input data collection. The RM-WF reported in Additional file 5: Figure S3 (b) specifies the main steps used in this phase.

Additional file 5. Supplementary Figure S3 (PNG file format) — Rapid Miner workflow. Rapid Miner WF for the Feature selection (a) and model construction/validation (b) phases. Blocks correspond to simple processes in the whole design: each operator receives an input and delivers an output to the forward operator. The function of each block is shortly reported as follow:

 ● Input Operator reads data from files.

 ● Info Gain Weighting Operator (Fig. a). Each signal is weighted by an information theory criterion (i.e., info–gain ratio). The forward phase (Fig. b) employees only signals having weight greater then 0.6;

 ● Cross Validation Operator encapsulates a cross validation (k–fold) process [37]: the input data set S is split up into subsets {S1S2.Sk}. The inner operators are applied k times using at each iteration i the set Sias the test set and SSias the training set.

 ● Parameter Optimization Operator In order for the SVMs to perform as better (and homogeneous) as possible for each datatype, we optimized the learning parameters over the same space of common values. That is, starting from common ranges (for every datatypes the same ranges of values are used) this operator finds the optimal combination (i.e., providing the highest SVM inference performance) of parameter values by using a cross validation process. Here, we briefly report the applied common ranges for the selected combinations (some documentation on Rapid Miner can be downloaded at http://rapid-i.com webcite)

 – SVM.kernel.type ∈ {ANOVA,DOT,POLYNOMIAL,RADIAL},

 – SVM.kernel.degree ∈ {2,…,6},

 – SVM.C, SVM. є ∈ {1,1.5,…,8}.

 ● Training SVM Operator implements a Support Vector Machine algorithm to deliver an inference model.

 ● Model Applier Operator applies the model delivered by the SVM operator.

 ● Performance Operator collects the performance evaluation of the classification task and outputs performance measures.

Format: PNG Size: 1.6MB Download fileOpen Data

Finally, standard indices (i.e., sensitivity, specificity, positive (PPV), negative predictive (NPV), accuracy, F-score, balanced accuracy, informedness and Matthews correlation coefficient) were used as performance measures to verify which data-types provide the best SVM classification [2].

Results and discussion

In this study, we investigated the classification of phenotypes by applying support vector machine (SVM) algorithms on experimental data obtained by MudPIT approach (Figure 1). Identified proteins, peptides and experimental mass spectra (m/z) were processed to evaluate the generalization capability of SVM about the disease vs. healthy cases used in this study (Additional file 1: Figure S1). For this purpose, a RapidMiner workflow was implemented (Additional file 4: Figure S3). Firstly, a set of data was used as input to SVM learning algorithm. Some learning parameters were optimized over the same common space of values [30]. Finally, data were evaluated according to the inference performance of the algorithm by using standard indices broadly applied to measure the precision and the recall capability [2].

thumbnailFigure 1. MudPIT workflow. Enzymatic digested peptides are first separated by Strong Cation Exchange (SCX), using steps of increasing salt concentration, followed by Reverse Phase (RP) chromatography, using an acetonitrile gradient. Eluted peptides are then directly analyzed by tandem mass spectrometry producing MS and MS/MS spectra. By specific algorithm, such as SEQUEST, and applying appropriate criteria of data filtering (see Additional file 2), the comparison of experimental MS and MS/MS spectra with those in-silico predicted from a protein sequence database allows the characterization of the peptide sequences and the corresponding proteins, without limits of isoelectric point (pI), molecular weight (Mw) or hydrophobicity. Using MudPIT, five different datasets per sample were collected for the study purposes. Specifically, in addition to complete protein and peptide profiles, m/z data, corresponding to 60 mM, 120 mM, 400 mM of salt concentration steps, were mined collecting three different datasets of spectra.

By applying a standard features selection procedure, ten features having a weight greater than 0.6 were selected from each dataset (see features selection phase in Materials and Methods). Model delivered by the SVM operator was applied on independent validation datasets for estimating the performances concerning the phenotype classification. Tables 1 and 2, reporting the standard indices, show the diagnostic capabilities of SVM by using two independent collection of samples and different data-types. Of note, the results suggest that SVM allows a better classification capability by using proteins and peptides rather than mass spectra datasets. In fact, better values of accuracy, F-score, informedness and MCC were observed by considering both collection 1 and collection 2. As opposite, samples classification by means of m/z data, resulted to be more difficult. In particular, by using the mass spectra of the collection 1 low values of specificity were observed, while the mass spectra of the collection 2 allowed low overall classification accuracy values.

Table 1. Performance of classification obtained by using SVM - Collection1

Table 2. Performance of classification obtained by using SVM - Collection2

The different classification performances, obtained by SVM, may be related to the m/z data complexity. In this regard, an overview of the data was performed by means of Principal Component Analysis (PCA) [38]. As opposed to protein and peptide data, PCA showed that mass spectra, especially for the collection 1, didn’t allow a clear differentiation in the multidimensional space between disease and healthy groups (Additional file 6: Figure S4). In this context, the great amount of mass spectra can make it difficult their data-mining. In fact, a single step of liquid chromatography separation allows the collection of a number of features (m/z values) about 15 and 3 times bigger than protein and peptide ones, respectively (Figure 2). This great amount of data may be due to the redundant acquisition of spectra, like so to the biological and/or chemical modifications of peptides/proteins (e.g. Post Translational Modifications). Moreover, m/z values may be affected by chemical noise as well as to day-to-day instrument variations. Therefore, preprocessing of the raw data significantly influences the quality of the classification results [39,40]. Nevertheless, further errors may be introduced during spectra alignment, while overlapping of m/z regions may create ambiguities for peak detection leading to increase the noise and to loss of information and discriminatory ability.

Additional file 6. Supplementary Figure S4 (PNG file format) — Principal Component Analysis of peptide, protein and m/z, data of collection 1 and 2. Overview of protein, peptide and mass spectra data matrices performed by Principal Component Analysis (PCA) (15). PCA was applied by RapidMiner software. High-dimensionality of each data matrix was preliminarily reduced by eliminating features identified with an identification frequency (IF) below a certain threshold. In detail, for protein and peptide datasets were retained features with IF>1, while concerning mass spectra datasets were retained features with IF>4. Finally, the principal components that account for most of the variation (PC1-PC2-PC3) in the original multivariate data were plotted in the multidimensional space.

Format: PNG Size: 25KB Download fileOpen Data

thumbnailFigure 2. Features selected for the study purposes. Number of features (m/z ions, peptides and proteins) collected analyzing, by MudPIT, all samples belonging to collection 1 and collection 2. DB1, DB2 and DB3 correspond to m/z data mined from 60 mM, 120 mM, 400 mM of salt concentration steps, respectively.

The identification of peptides and proteins by means of the interpretation of tandem mass spectra, can represent a cleaning and a simplifying of m/z data complexity. This aspect probably improved the features selection process and consequently the performance of classification by means of SVM model. For each collection about 20% of the selected features resulted common between protein and peptide datasets. Besides, around 80% of proteins and peptides, selected by SVM, matched with the differentially expressed proteins selected by MAProMa software (Figure 3). This correspondence represents a mutual validation of these two different procedures and it means that differentially expressed proteins may be used also for a correct grouping of sample phenotypes. For this reason, the use statistical parameters associated with identified proteins and peptides represents a robust procedure for a rapid extraction of potential biomarkers. In addition, MudPIT approach allows a good analytical reproducibility (Figure 4). In fact, although only 60-80 % of protein are identified in two replicate analyses, most of the variation is due to low abundance proteins which are usually identified with a low number of peptides. However, a statistical model has been proposed for estimating the number of replicates required for saturated sampling of a complex protein mixture [41].

thumbnailFigure 3. DAve values for proteins and peptides selected by SVM. DAve evaluates changes in protein expression and is defined as: ((XY)/(X + Y))/0.5, while DCI, which describes the confidence of differential expression, is defined as: (X + Y)∗(XY))/2, where X and Y represent the SEQUEST-based SCORE values (or spectral count) of a given protein in two compared samples. Conventionally, signs (+/-) of DAve (and DCI) indicate if proteins are up-regulated in the first or in the second sample, respectively.

thumbnailFigure 4. MudPIT repeatability. Linear regression analysis obtained by considering SpC values of proteins identified in two technical replicates of MudPIT analysis. R2 and Slope values resulted near to 1. Red rectangle highlights the proteins identified with a low number of peptides and which represent the portion of data less reproducible.

Our findings are in good agreement with the most widely used semi-quantitative methods concerning the identification of biomarkers using LC-MS/MS approach [25,27]. As for the identification of clinically useful biomarkers, in the last decade, SELDI-TOF analysis has been widely used and many diseases have been mainly studied by serum/plasma protein profiling. Although preliminary results have generated a lot of expectations, later scepticism resulted prevalent [42]. The reasons of this failure is probably due to SELDI profiling based on m/z signals, only, and it doesn’t permits a direct identification and quantification of peptides/proteins. In addition, blood samples, although relatively simple to be collected, have a very complex composition with the presence of prominent and unspecific changes, resulting a drawback for the biomarker discovery based on m/z signals. On the contrary, we have evidenced in the present manuscript the improved availability of peptide/protein outcomes to allow biomarker discovery and phenotype discrimination. In comparison to mass spectra, sequenced proteins and peptides are less affected by experimental errors, and their use can be useful to avoid the problems of reproducibility due to different instrumental settings occurring over time. In addition, model of healthy/disease tissues represents a source of biomarkers in higher concentration than to plasma, which may be considered mainly useful in their monitoring using other LC-MS procedures [43].

Conclusion

To realize the potential of MS-based proteomics in the context of clinical utility, for disease diagnosis and prognosis, comparative studies are of great importance. In the present work, MudPIT data, both experimental mass spectra and sequenced peptides/proteins, were processed by SVM for evaluating the corresponding performances of classification. The overall accuracy resulted in all investigated cases higher than 77%. In particular, proteins/peptides allowed a better discriminant informative content than experimental mass spectra (overall accuracy higher than 87% in both collection 1 and 2). This result is probably due to the translation of mass spectra to peptides/proteins, that eliminates the experimental noise and highlight the actual features useful for the phenotype classification. Overall, the presented findings indicate that the impressive amount of data produced by MudPIT approach can be processed for identifying multiple biomarkers and for classifying biological samples, by applying both supervised and unsupervised algorithms. These procedures permit the evaluation of actual samples and translate proteomic methodology to clinical application. In this context, MudPIT approach can be a useful tool for improving the extraction of informative features and therefore diagnosis procedures. Probably, in the next future new and more efficient algorithms will be applied, and the discovered biomarkers will be validated by means of fast and high-resolution mass spectrometry and data independent analysis [44,45]. These aspects will be of primary importance to be combined with clinical data and for investigating mechanisms of pathogenesis. In fact, the improved quality of data has the potential to optimize existing protein quantification methods and address the increasing demand of systems biology studies for correlating molecular expression to biological processes.

Abbreviations

SVM: Support Vector Machine; MudPIT: Multidimensional Protein Identification Technology; MAProMa: Multidimensional Algorithm Protein Map; MALDI: Matrix-Assisted Laser Desorption/Ionization; SELDI: Surface-Enhanced Laser Desorption/Ionization; LC: Liquid Chromatography; MS: Mass Spectrometry; MS/MS: Tandem Mass Spectra; SpC: Spectral Count; DAve: Differential Average; DCI: Differential Confidence Index; RM-WF: Rapid Miner - WorkFlow; PPV: Positive Predicted Value; NPV: Negative Predicted Value; MCC: Matthews Correlation Coefficient; PCA: Principal Component Analysis.

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

DDS and IZ carried out the processing of the experimental data, the interpretation of the results and wrote the manuscript; FB performed the MudPIT experiments; VB carried out the administrative management, GM and PLM conceived the project, participated in the design of the study and in the writing of the manuscript. All authors read and approved the final manuscript.

Authors’ information

DDS (PhD), Permanent Researcher at the Proteomic and Metabolomic Department of the Institute of Biomedical Technologies - National Research Council (ITB-CNR), located in Segrate (Milan), Italy. His skills include the bioinformatic processing of proteomic data and their functional characterization by using data-derived systems biology approach. IZ (PhD), Permanent Researcher at the Computer Science Department of the University of Milano-Bicocca, located in Milan (Italy). His skills include the machine learning applications to bioinformatics and computational systems biology. FB (PhD), Researcher at the Proteomic and Metabolomic Department of the Institute of Biomedical Technologies - National Research Council (ITB-CNR), located in Segrate (Milan), Italy. His skills include the high-throughput proteomic analysis of complex biological samples by means of the MudPIT methodology. VB, Technician at the Proteomic and Metabolomic Department of the Institute of Biomedical Technologies - National Research Council (ITB-CNR), located in Segrate (Milan), Italy. GM (PhD), Full Professor and Director at the Computer Science Department of the University of Milano-Bicocca, located in Milan (Italy). PLM (PhD), Principal Investigator at the Proteomic and Metabolomic Department of the Institute of Biomedical Technologies - National Research Council (ITB-CNR), located in Segrate (Milan), Italy.

Acknowledgements

This study was supported by the Italian Ministry of Economy and Finance to the CNR for the Project ’FaReBio di Qualita’, by Italian Ministry of University and Research for the Project FAR Milano-Bicocca 2011-2012 and PON (01 02388), and by Fondazione Cariplo (2010-0653 and 2009-3149). The authors thank M.G. Bitonti for the availability of MAProMa software.

References

  1. Palmblad M, Tiss A, Cramer R: Mass spectrometry in clinical proteomics - from the present to the future.

    Proteomics Clin Appl 2009, 3:6-17.

    [ http://dx.doi.org/10.1002/prca.200800090 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  2. Ressom HW, Varghese RS, Zhang Z, Xuan J, Clarke R: Classification algorithms for phenotype prediction in genomics and proteomics.

    Front Biosci 2008, 13:691-708. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  3. Frenzel J, Gessner C, Sandvoss T, Hammerschmidt S, Schellenberger W, Sack U, Eschrich K, Wirtz H: Outcome prediction in pneumonia induced ALI/ARDS by clinical features and peptide patterns of BALF determined by mass spectrometry.

    PLoS One 2011, 6(10):e25544.

    [ http://dx.doi.org/10.1371/journal.pone.0025544 webcite]

    PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  4. Sampson DL, Parker TJ, Upton Z, Hurst CP: A comparison of methods for classifying clinical samples based on proteomics data: a case study for statistical and machine learning approaches.

    PLoS One 2011, 6(9):e24973.

    [ http://dx.doi.org/10.1371/journal.pone.0024973 webcite]

    PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  5. Waloszczyk P, Janus T, Alchimowicz J, Grodzki T, Borowiak K: Proteomic patterns analysis with multivariate calculations as a promising tool for prompt differentiation of early stage lung tissue with cancer and unchanged tissue material.

    Diagn Pathol 2011, 6:22.

    [ http://dx.doi.org/10.1186/1746-1596-6-22 webcite]

    PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  6. Rajalahti T, Kroksveen AC, Arneberg R, Berven FS, Vedeler CA, Myhr KM, Kvalheim OM: A multivariate approach to reveal biomarker signatures for disease classification: application to mass spectral profiles of cerebrospinal fluid from patients with multiple sclerosis.

    J Proteome Res 2010, 9(7):3608-3620.

    [ http://dx.doi.org/10.1021/pr100142m webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  7. Camaggi CM, Zavatto E, Gramantieri L, Camaggi V, Strocchi E, Righini R, Merina L, Chieco P, Bolondi L: Serum albumin-bound proteomic signature for early detection and staging of hepatocarcinoma: sample variability and data classification.

    Clin Chem Lab Med 2010, 48(9):1319-1326.

    [ http://dx.doi.org/10.1515/CCLM.2010.248 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  8. Kim HK, Reyzer ML, Choi IJ, Kim CG, Kim HS, Oshima A, Chertov O, Colantonio S, Fisher RJ, Allen JL, Caprioli RM, Green JE: Gastric cancer-specific protein profile identified using endoscopic biopsy samples via MALDI mass spectrometry.

    J Proteome Res 2010, 9(8):4123-4130.

    [ http://dx.doi.org/10.1021/pr100302b webcite]

    PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  9. Balog CIA, Alexandrov T, Derks RJ, Hensbergen PJ, van Dam GJ, Tukahebwa EM, Kabatereine NB, Thiele H, Vennervald BJ, Mayboroda OA, Deelder AM: The feasibility of MS and advanced data processing for monitoring Schistosoma mansoni infection.

    Proteomics Clin Appl 2010, 4(5):499-510.

    [ http://dx.doi.org/10.1002/prca.200900158 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  10. Chinello C, Gianazza E, Zoppis I, Mainini V, Galbusera C, Picozzi S, Rocco F, Galasso G, Bosari S, Ferrero S, Perego R, Raimondo F, Bianchi C, Pitto M, Signorini S, Brambilla P, Mocarelli P, Galli Kienle M, Magni F: Serum biomarkers of renal cell carcinoma assessed using a protein profiling approach based on clinProt technique.

    Urology 2010, 75(4):842-847. PubMed Abstract | Publisher Full Text OpenURL

  11. Lin Q, Peng Q, Yao F, Pan XF, Xiong LW, Wang Y, Geng JF, Feng JX, Han BH, Bao GL, Yang Y, Wang X, Jin L, Guo W, Wang JC: A classification method based on principal components of SELDI spectra to diagnose of lung adenocarcinoma.

    PLoS One 2012, 7(3):e34457.

    [ http://dx.doi.org/10.1371/journal.pone.0034457 webcite]

    PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  12. Fan Y, Wang J, Yang Y, Liu Q, Fan Y, Yu J, Zheng S, Li M, Wang J: Detection and identification of potential biomarkers of breast cancer.

    J Cancer Res Clin Oncol 2010, 136(8):1243-1254.

    [ http://dx.doi.org/10.1007/s00432-010-0775-1 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  13. Tang KL, Li TH, Xiong WW, Chen K: Ovarian cancer classification based on dimensionality reduction for SELDI-TOF data.

    BMC Bioinformatics 2010, 11:109.

    [ http://dx.doi.org/10.1186/1471-2105-11-109 webcite]

    PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  14. Van Gorp T, Cadron I, Daemen A, De Moor B, Waelkens E, Vergote I: Proteomic biomarkers predicting lymph node involvement in serum of cervical cancer patients. Limitations of SELDI-TOF MS.

    Proteome Sci 2012, 10:41.

    [ http://dx.doi.org/10.1186/1477-5956-10-41 webcite]

    PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  15. Wiesner C, Hannum C, Reckamp K, Figlin R, Dubridge R, Roy SM, Lin S, Becker CH, Jones T, Hiller J, Cheville JC, Wilson K: Consistency of a two clinical site sample collection: a proteomics study.

    Proteomics Clin Appl 2010, 4(8-9):726-738.

    [ http://dx.doi.org/10.1002/prca.200900206 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  16. Gambin A, Szczurek E, Dutkowski J, Bakun M, Dadlez M: Classification of peptide mass fingerprint data by novel no-regret boosting method.

    Comput Biol Med 2009, 39(5):460-473.

    [ http://dx.doi.org/10.1016/j.compbiomed.2009.03.006 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  17. Perez-Riverol Y, Audain E, Millan A, Ramos Y, Sanchez A, Vizcaino JA, Wang R, Mller M, Machado YJ, Betancourt LH, González LJ, Padrn G, Besada V: Isoelectric point optimization using peptide descriptors and support vector machines.

    J Proteomics 2012, 75(7):2269-2274.

    [ http://dx.doi.org/10.1016/j.jprot.2012.01.029 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  18. Ding J, Shi J, Wu FX: SVM-RFE based feature selection for tandem mass spectrum quality assessment.

    Int J Data Min Bioinform 2011, 5:73-88. PubMed Abstract | Publisher Full Text OpenURL

  19. Webb-Robertson BJM: Support vector machines for improved peptide identification from tandem mass spectrometry database search.

    Methods Mol Biol 2009, 492:453-460.

    [ http://dx.doi.org/10.1007/978-1-59745-493-3_28 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  20. Baczek T, Kaliszan R: Predictions of peptides’ retention times in reversed-phase liquid chromatography as a new supportive tool to improve protein identification in proteomics.

    Proteomics 2009, 9(4):835-847.

    [ http://dx.doi.org/10.1002/pmic.200800544 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  21. Gaspari M, Verhoeckx KCM, Verheij ER, van der Greef J: Integration of two-dimensional LC-MS with multivariate statistics for comparative analysis of proteomic samples.

    Anal Chem 2006, 78(7):2286-2296.

    [ http://dx.doi.org/10.1021/ac052000t webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  22. Sodek KL, Evangelou AI, Ignatchenko A, Agochiya M, Brown TJ, Ringuette MJ, Jurisica I, Kislinger T: Identification of pathways associated with invasive behavior by ovarian cancer cells using multidimensional protein identification technology (MudPIT).

    Mol Biosyst 2008, 4(7):762-773.

    [ http://dx.doi.org/10.1039/b717542f webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  23. Simioniuc A, Campan M, Lionetti V, Marinelli M, Aquaro GD, Cavallini C, Valente S, Di Silvestre D, Cantoni S, Bernini F, Simi C, Pardini S, Mauri P, Neglia D, Ventura C, Pasquinelli G, Recchia FA: Placental stem cells pre-treated with a hyaluronan mixed ester of butyric and retinoic acid to cure infarcted pig hearts: a multimodal study.

    Cardiovasc Res 2011, 90(3):546-556.

    [ http://dx.doi.org/10.1093/cvr/cvr018 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  24. Mauri P, Scigelova M: Multidimensional protein identification technology for clinical proteomic analysis.

    Clin Chem Lab Med 2009, 47(6):636-646.

    [ http://dx.doi.org/10.1515/CCLM.2009.165 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  25. Yates JR, Ruse CI, Nakorchevsky A: Proteomics by mass spectrometry: approaches, advances, and applications.

    Annu Rev Biomed Eng 2009, 11:49-79.

    [ http://dx.doi.org/10.1146/annurev-bioeng-061008-124934 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  26. Mauri P, Scarpa A, Nascimbeni AC, Benazzi L, Parmagnani E, Mafficini A, Della Peruta M, Bassi C, Miyazaki K, Sorio C: Identification of proteins released by pancreatic cancer cells by multidimensional protein identification technology: a strategy for identification of novel cancer markers.

    FASEB J 2005, 19(9):1125-1127.

    [ http://dx.doi.org/10.1096/fj.04-3000fje webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  27. Park SK, Venable JD, Xu T, Yates JR 3rd: A quantitative analysis software tool for mass spectrometry-based proteomics.

    Nat Methods 2008, 5(4):319-322.

    [ http://dx.doi.org/10.1038/nmeth.1195 webcite]

    PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  28. Bergamini G, Di Silvestre D, Mauri P, Cigana C, Bragonzi A, De Palma A, Benazzi L, Døring G, Assael BM, Melotti P, Sorio C: MudPIT analysis of released proteins in Pseudomonas aeruginosa laboratory and clinical strains in relation to pro-inflammatory effects.

    Integr Biol (Camb) 2012, 4(3):270-279.

    [ http://dx.doi.org/10.1039/c2ib00127f webcite]

    Publisher Full Text OpenURL

  29. Guyon I, Gunn S, Nikravesh M, Zadeh LA (Ed): Feature Extraction: Foundations and Applications (Studies in Fuzziness and Soft Computing). Berlin Heidelberg: Springer-Verlag; 2006.

    (ISBN 978-3-540-35488-8)

    OpenURL

  30. Cristianini N, Schawe-Taylor J: An Introduction to Support Vector Machines and Other Kernel-Based Learning Methods. New York, NY, USA: Cambridge University Press; 2000.

    (ISBN 9780521780193)

    OpenURL

  31. Mauri P, Dehı G: A proteomic approach to the analysis of RNA degradosome composition in Escherichia coli.

    Methods Enzymol 2008, 447:99-117.

    [ http://dx.doi.org/10.1016/S0076-6879(08)02206-4 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  32. Brambilla F, Lavatelli F, Di Silvestre D, Valentini V, Rossi R, Palladini G, Obici L, Verga L, Mauri P, Merlini G: Reliable typing of systemic amyloidoses through proteomic analysis of subcutaneous adipose tissue.

    Blood 2012, 119(8):1844-1847.

    [ http://dx.doi.org/10.1182/blood-2011-07-365510 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  33. Pluskal T, Castillo S, Villar-Briones A, Oresic M: MZmine 2: modular framework for processing, visualizing, and analyzing mass spectrometry-based molecular profile data.

    BMC Bioinformatics 2010, 11:395.

    [ http://dx.doi.org/10.1186/1471-2105-11-395 webcite]

    PubMed Abstract | BioMed Central Full Text | PubMed Central Full Text OpenURL

  34. Ducret A, Van Oostveen I, Eng JK, Yates 3rd J, Aebersold R:

    High throughput protein characterization by automated reverse-phase chromatography/electrospray tandem mass spectrometry. Protein Sci. 1998, 7(3):706-719.

    [ http://dx.doi.org/10.1002/pro.5560070320 webcite]

    OpenURL

  35. Di Silvestre D, Daminelli S, Brunetti P, Mauri PL: Bioinformatics Tools for Mass Spectrometry-Based Proteomics Analysis. Reviews in Pharmaceutical and Biomedical Analysis - BENTHAM SCIENCE PUBLISHERS; 2010.

    3:30–52. (ISBN 978-1-60805-190-8)

    OpenURL

  36. Zhang B, VerBerkmoes NC, Langston MA, Uberbacher E, Hettich RL, Samatova NF: Detecting differential and correlated protein expression in label-free shotgun proteomics.

    J Proteome Res 2006, 5(11):2909-2918.

    [ http://dx.doi.org/10.1021/pr0600273 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  37. Mitchell T: Machine Learning. New York, NY, USA: McGraw-Hill, Inc.; 1997. OpenURL

  38. Jackson JE: A Users’ Guide to Principal Components. New York: Wiley; 1991. PubMed Abstract OpenURL

  39. Arneberg R, Rajalahti T, Flikka K, Berven FS, Kroksveen AC, Berle M, Myhr KM, Vedeler CA, Ulvik RJ, Kvalheim OM: Pretreatment of mass spectral profiles: application to proteomic data.

    Anal Chem 2007, 79(18):7014-7026.

    [ http://dx.doi.org/10.1021/ac070946s webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  40. Zoppis I, Gianazza E, Borsani M, Chinello C, Mainini V, Galbusera C, Ferrarese C, Galimberti G, Sorbi S, Borroni B, Magni F, Antoniotti M, Mauri G: Mutual information optimization for mass spectra data alignment.

    IEEE/ACM Trans Comput Biol Bioinformatics 2012, 9(3):934-939. OpenURL

  41. Liu H, Sadygov RG, Yates 3rd JR: A model for random sampling and estimation of relative protein abundance in shotgun proteomics.

    Anal Chem 2004, 76(14):4193-4201.

    [ http://dx.doi.org/10.1021/ac0498563 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  42. Albrethsen J, Bøgebo R, Møller CH, Olsen JA, Raskov HH, Gammeltoft S: Candidate biomarker verification: Critical examination of a serum protein pattern for human colorectal cancer.

    Proteomics Clin Appl 2012, 6(3-4):182-189.

    [ http://dx.doi.org/10.1002/prca.201100095 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  43. Gallien S, Duriez E, Crone C, Kellmann M, Moehring T, Domon B: Targeted proteomic quantification on quadrupole-orbitrap mass spectrometer.

    Mol Cell Proteomics 2012, 11(12):1709-1723.

    [ http://dx.doi.org/10.1074/mcp.O112.019802 webcite]

    PubMed Abstract | Publisher Full Text OpenURL

  44. Bern M, Finney G, Hoopmann MR, Merrihew G, Toth MJ, MacCoss MJ: Deconvolution of mixture spectra from ion-trap data-independent-acquisition tandem mass spectrometry.

    Anal Chem 2010, 82(3):833-841.

    [ http://dx.doi.org/10.1021/ac901801b webcite]

    PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  45. Gillet LC, Navarro P, Tate S, Røst H, Selevsek N, Reiter L, Bonner R, Aebersold R: Targeted data extraction of the MS/MS spectra generated by data-independent acquisition: a new concept for consistent and accurate proteome analysis.

    Mol Cell Proteomics 2012, 11(6):O111.016717.

    [ http://dx.doi.org/10.1074/mcp.O111.016717 webcite]

    PubMed Abstract | Publisher Full Text OpenURL